DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Mirrors >> Mirror (Ext) - Service Information >> Outer Rear View Mirror >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER 
    1. Engage the 2 guides and claw.
    2. Install the outer rear view mirror assembly with cover with the 3 nuts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

    3. Connect each connector.
    4. Engage the clamp.
  2. INSTALL OUTER MIRROR INSTALL HOLE COVER 
    1. Engage the 3 claws.
    2. Install the outer mirror install hole cover with the screw.
    3. Engage the 2 clamps.
  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 39 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 39 [10/2022 - ]

  4. INSTALL COURTESY LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 2

  5. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side) 

    Refer to PROCEDURE - Step 42 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 42 [10/2022 - ]

  6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side) 

    Refer to PROCEDURE - Step 43 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 43 [10/2022 - ]

  7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL 

    Refer to PROCEDURE - Step 41 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 41 [10/2022 - ]

  8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH 

    Refer to PROCEDURE - Step 44 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 44 [10/2022 - ]

  9. PERFORM CALIBRATION (w/ Panoramic View Monitor System) 

    Refer to CALIBRATION [12/2019 - 10/2022] , or refer to CALIBRATION [10/2022 - 11/2023] , or refer to CALIBRATION [11/2023 - ]

Diesel-Data.com