DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Ext) - Service Information >> Rear Light Assembly >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL REAR LIGHT ASSEMBLY 
    1. Engage the guide.
    2. Install the rear light assembly with the 4 nuts.

      Torque: 3.0 N.m (31 kgf/cm, 27 in.lbf) 

    3. Connect the connector.
    4. Engage the clamp.
  2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY (w/ Power Back Door) 

    Refer to PROCEDURE - Step 1

  3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 35

  4. INSTALL BACK DOOR SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 36

  5. INSTALL BACK DOOR SERVICE HOLE COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

Diesel-Data.com