DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Ext) - Service Information >> Hazard Warning Switch >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY 
    1. Engage the 2 claws to install the hazard warning signal switch assembly as shown in the illustration.
      GTY939996Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Connect the connector.
  2. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 
    1. Engage the 5 clips to install the No. 3 instrument panel register assembly as shown in the illustration.
      GTY944596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 21

  4. INSTALL RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 8 Inch Display) 

    Refer to PROCEDURE - Step 5

  5. INSTALL MULTI-DISPLAY WITH AIR CONDITIONING CONTROL (for 12.3 Inch Display) 

    Refer to PROCEDURE - Step 4

  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 24

Diesel-Data.com