Installation [12/2019 - ]: Procedure

INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

NOTE:

Do not touch the speaker cone.

Install the front No. 1 speaker assembly with the 4 screws.

Fig 1: Front No. 1 Speaker Assembly Screws Tightening Sequence

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for LH Side

for RH Side

HINT:

Install the screws in the order shown in the illustration.

INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Refer to PROCEDURE - Step 39 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 39 [10/2022 - ]
INSTALL COURTESY LIGHT ASSEMBLY
Refer to PROCEDURE - Step 2
INSTALL FRONT DOOR INSIDE HANDLE BEZEL
Refer to PROCEDURE - Step 41 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 41 [10/2022 - ]
INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
Refer to PROCEDURE - Step 42 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 42 [10/2022 - ]
INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
Refer to PROCEDURE - Step 43 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 43 [10/2022 - ]
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
Refer to PROCEDURE - Step 44 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 44 [10/2022 - ]
INSPECT POWER WINDOW OPERATION
Refer to OPERATION CHECK [12/2019 - ]