Removal [12/2019 - 11/2023]: Procedure

REMOVE FRONT DOOR SCUFF PLATE RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 9 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]
REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 10 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - ]
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Refer to PROCEDURE - Step 29 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 28 [10/2022 - 11/2023]
REMOVE INSTRUMENT PANEL FINISH END PANEL RH
Refer to PROCEDURE - Step 30 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 29 [10/2022 - 11/2023]
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 31 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 30 [10/2022 - 11/2023]
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 32 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 31 [10/2022 - 11/2023]

REMOVE ECU INTEGRATION BOX RH

Disengage the 2 clamps.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the nut, bolt and ECU integration box RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Nut
	Bolt

REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

Disengage the 2 claws to remove the central gateway ECU (network gateway ECU) as shown in the illustration.

Remove in this Direction

NOTE: