DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information >> Clearance Warning Ecu >> Installation [11/2023 - ] >> Procedure

Installation [11/2023 - ]: Procedure

  1. INSTALL CLEARANCE WARNING ECU ASSEMBLY 
    1. Engage the claw to install the clearance warning ECU assembly as shown in the illustration.
      GTY860059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  2. INSTALL ECU INTEGRATION BOX RH 

    Refer to PROCEDURE - Step 2

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  5. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16

  6. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 1

  7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 49

  8. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 50

  9. UPDATE ECU SECURITY KEY 

    Refer to UPDATE ECU SECURITY KEY [11/2023 - ]

  10. PERFORM CALIBRATION (w/o Parking Support Brake System) 

    Refer to CALIBRATION [11/2023 - ]

  11. PERFORM CALIBRATION (w/ Parking Support Brake System) 

    Refer to CALIBRATION [11/2023 - ]

    • SST: 09989-00020 
Diesel-Data.com