DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Body Panels / Trim - Service Information (1 Of 2) >> Front Console Box >> Reassembly [10/2022 - ] >> Procedure

Reassembly [10/2022 - ]: Procedure

  1. INSTALL REAR CONSOLE BOX WIRE 
    1. Engage the 3 clamps to install the rear console box wire.
      GTY898430Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the clamp and guide.
      GTY905694Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
      *b Guide
    3. Install the No. 1 trash box retainer support with the 6 screws.
      GTY898428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Engage the 6 claws as shown in the illustration to install the No. 2 console mounting retainer.
      GTY891923Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    5. Engage the 2 clamps.
      GTY898431Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Engage the 3 guides as shown in the illustration.
      GTY857958Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    7. Engage the 4 clips to install the No. 3 box panel.
      GTY939434Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Engage the 3 guides as shown in the illustration.
      GTY927669Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    9. Engage the 4 clips to install the No. 1 box panel.
      GTY898345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL UPPER CONSOLE DOOR SUB-ASSEMBLY 
    1. While slightly pulling areas (A) and (B) in the direction shown in the illustration to enable the upper console door sub-assembly to pass over the stoppers, insert the upper console door sub-assembly in the direction shown in the illustration to install it.
      GTY890616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
      Pull
      Install in this Direction
      NOTE:

      To prevent damage to the console box assembly, do not pull it excessively.

      HINT: 

      2 persons are required for this procedure.

    2. Install the upper console door sub-assembly with the 2 screws.
      GTY898439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CONSOLE BOX POCKET (w/ Console Box Pocket) 
    1. Install the console box pocket.
      GTY898211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. INSTALL NO. 2 POWER OUTLET SOCKET COVER 

    Refer to PROCEDURE - Step 1

  6. INSTALL NO. 2 POWER OUTLET SOCKET ASSEMBLY 

    Refer to PROCEDURE - Step 2

  7. INSTALL CONSOLE REAR END PANEL 
    1. Engage the 8 clips as shown in the illustration to install the console rear end panel.
      GTY914190Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Engage the clamp.
      GTY907616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 1

  9. INSTALL REAR CONSOLE COVER 
    1. Engage the 6 clips as shown in the illustration to install the rear console cover.
      GTY932810Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
Diesel-Data.com