DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System - Service Information >> ELECTRICAL KEY OSCILLATOR (for Center Floor) >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY 
    1. Connect the connector.
      NOTE:

      Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Engage the clamp to install the No. 2 indoor electrical key antenna assembly.
  2. INSTALL CONSOLE REAR END PANEL 

    Refer to PROCEDURE - Step 7 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 7 [10/2022 - ]

  3. INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. INSTALL REAR CONSOLE COVER 

    Refer to PROCEDURE - Step 9 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]

  5. INSTALL NO. 2 CONSOLE BOX HOLE COVER 

    Refer to PROCEDURE - Step 2 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 2 [10/2022 - ]

  6. INSTALL REAR CONSOLE LOWER BOX 

    Refer to PROCEDURE - Step 3 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 3 [10/2022 - ]

  7. INSTALL CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 12 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 12 [10/2022 - ]

  8. INSTALL NO. 2 CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 13 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 13 [10/2022 - ]

Diesel-Data.com