DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication System - Service Information >> DCM (Telematics Transceiver) >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL DCM (TELEMATICS TRANSCEIVER) 
  2. INSTALL NO. 2 TELEPHONE BRACKET 
    1. Install the No. 2 telephone bracket with the 2 screws.
  3. INSTALL NO. 1 TELEPHONE BRACKET 
    1. Install the No. 1 telephone bracket with the 2 screws.
  4. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET 
    1. Connect each connector.
    2. Install the DCM (telematics transceiver) with bracket with the 2 nuts.
  5. INSTALL FRONT CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 4 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 4 [10/2022 - ]

  6. INSTALL FRONT NO. 2 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 5 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 5 [10/2022 - ]

  7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 6 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 6 [10/2022 - ]

  8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 14 [10/2022 - ]

  9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 15 [10/2022 - ]

  10. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 16 [10/2022 - ]

  11. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 1

  12. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 51 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 49 [10/2022 - ]

  13. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 52 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 50 [10/2022 - ]

  14. INSTALL NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 26 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 25 [10/2022 - ]

  15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 29 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 28 [10/2022 - ]

  16. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 51 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 49 [10/2022 - ]

  17. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 52 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 50 [10/2022 - ]

  18. INSTALL CONSOLE BOX ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

  19. PERFORM DCM ACTIVATION 

    HINT: 

    After replacing the DCM (telematics transceiver), make sure to perform DCM activation.

    Refer to DCM ACTIVATION [12/2019 - ]

  20. PERFORM REGISTRATION 

    HINT: 

    After replacing the DCM (telematics transceiver), make sure to perform code registration.

    for HV Model: Refer to REGISTRATION [12/2019 - 10/2021] , or refer to REGISTRATION [10/2021 - 11/2023] , or refer to REGISTRATION [11/2023 - ]

    for Gasoline Model: Refer to REGISTRATION [12/2019 - 10/2021] , or refer to REGISTRATION [10/2021 - 10/2022] , or refer to REGISTRATION [10/2022 - 11/2023] , or refer to REGISTRATION [11/2023 - ]

Diesel-Data.com