DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> Certification Ecu >> Removal [12/2019 - 11/2023] >> Procedure

Removal [12/2019 - 11/2023]: Procedure

  1. REMOVE FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 9 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 10 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - ]

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    Refer to PROCEDURE - Step 29 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 28 [10/2022 - 11/2023]

  4. REMOVE INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 30 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 29 [10/2022 - 11/2023]

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 30 [10/2022 - 11/2023]

  6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 32 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 31 [10/2022 - 11/2023]

  7. REMOVE ECU INTEGRATION BOX RH 

    Refer to PROCEDURE - Step 7

  8. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 
    1. Disengage the 2 claws and remove the certification ECU (smart key ECU assembly) as shown in the illustration.
      NOTE:
      • If the ECU integration box RH is deformed or damaged, replace it.
      • Do not bend the 2 claws more than necessary.
      GTY873750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
Diesel-Data.com