DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information >> CLEARANCE WARNING BUZZER (for Front) >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL NO. 1 CLEARANCE WARNING BUZZER 
    1. Connect the connector.
    2. Engage the clamp to install the No. 1 clearance warning buzzer.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT 

    Refer to PROCEDURE - Step 3

  3. INSTALL FRONT CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 4

  4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 6

  5. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  7. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16

  8. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 1

  9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 49

  10. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 50

  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 20

  12. INSTALL RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL 

    for 8 Inch Display:

    Refer to PROCEDURE - Step 5

    for 12.3 Inch Display:

    Refer to PROCEDURE - Step 11

  13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23

  14. INSTALL NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 25

  15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28

  16. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 36

  17. INSTALL TRIP SWITCH 

    Refer to PROCEDURE - Step 1

  18. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 38

  19. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 39

  20. INSTALL INSTRUMENT PANEL FINISH END PANEL LH 

    Refer to PROCEDURE - Step 40

  21. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 1

  22. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 49

  23. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 50

  24. INSTALL CONSOLE BOX ASSEMBLY 

    Refer to INSTALLATION [10/2022 - ]

Diesel-Data.com